A toilet bowl can be extremely difficult to clean when hard water causes stains on the interior of the tank and when it turns a rusty, dark brown color. However, there is no need to give up and replace the entire unit. In fact, thanks to some effective and proven tips from a Plumbing Contractor in Memphis, it can be quite easy to get rid of these unsightly stains. The key is to know what to do.
Step 1: Empty the Water from the Toilet
The first step in getting rid of these unsightly stains is to empty as much of the water out of the bowl as possible. The best way to do this is by turning the water to the tank off and then flushing it. This should remove any standing water that is present.
Step 2: Refill the Bowl with White Vinegar
The next step is to refill the toilet bowl with white vinegar so that all of the stains are fully covered with this solution. In some cases, this will take a gallon or more.
Step 3: Leave the Vinegar in the Bowl
Once the vinegar has been added, the lid should be closed, and it should be left alone for eight to 12 hours. During this time, don’t use or flush the toilet or the mixture won’t be effective.
Step 4: Scrub the Bowl
Once the vinegar has been given enough time to dissolve the stains, then use a regular toilet brush to scrub all the grime away. At this point, a person should be able to flush and enjoy their nice, clean toilet.
Step 5: Remove Extra-Stubborn Stains
If there are still stained areas in the toilet, the homeowner may have to use a pumice stone to clean them away. Make sure there is plenty of water in the bowl and then scrub away until all the stains are gone.
Staining in a toilet can occur due to a number of different factors. If hard water is the issue, a Plumbing Contractor Memphis may be able to offer solutions for this problem. More information about these services can be found by contacting Drain Go Plumbing or by taking some time to visit website.
